Superparamagnetic Adsorbent Based on Phosphonate Grafted Mesoporous Carbon for Uranium Removal

Syed M. Husnain, Hyun Ju Kim, Wooyong Um, Yoon‐Young Chang, Yoon‐Seok Chang, Yoon‐Seok Chang, Yoon‐Seok Chang

Industrial & Engineering Chemistry Research · 2017 · 61 citations · 53 references

Concepts

Abstract

A direct approach was presented to graft phosphonate groups on magnetic mesoporous carbon by an impregnation method with environmentally friendly precursors unlike the conventional methods involving a series of complicated steps and harsh conditions. Through the in situ reduction of Fe 3+, magnetite particles of ∼10 nm were successfully embedded into the mesopores, which was confirmed by HR-TEM. Surface characterization by X-ray photoelectron spectroscopy and Fourier transform infrared revealed phosphonate functional groups anchored through multidentate bonding with the surface of P–Fe–CMK-3. Due to the combined advantages of mesoporous pore size (5.5 nm), phosphonate ligands (1.42 mmol g –1 ), and magnetic sensitivity (5.20 emu g –1 ), this multifunctional adsorbent captured >85% of UO 2 2+ within 5 min and the maximum adsorption capacity was 150 mg g –1 at pH 4. The exceptionally high selectivity and efficiency of P–Fe–CMK-3 toward uranyl capture even in groundwater ( K d = 1 × 10 5 mL g –1 ), radioactive wastewater ( K d = 3 × 10 4 mL g –1 ), and seawater ( K d = 1 × 10 4 mL g –1 ) at V/m = 1000 mL g –1 was better than that of the previously reported adsorbents. Importantly, the adsorbent maintained UO 2 2+ adsorption efficiency >99% over five cycles due to the excellent chemical and structural stabilities. Above all, the adsorbent could be manipulated for UO 2 2+ capture with help of a magnetic field in the real world, especially in case of nuclear accidents, decommissioning of nuclear power plants and/or uranium recovery from seawater.

References

53