A sensitivity analysis on the fifth and the seventh harmonic current injection for sixth order torque ripple reduction

Ali Najmabadi, Wei Xu, M.W. Degner

2017 · 18 citations · 8 references

Concepts

Abstract

Interior permanent magnet (IPM) electric machines offer higher efficiency and higher torque and power density when compared to other types of electric machines. Like many electric machines, IPM machines also inherently produce unwanted torque ripple along with the desired average torque. Depending on the application, this torque ripple could be problematic. A well-known approach for sixth order torque ripple compensation is based on current shaping via the injection of the fifth and seventh harmonic currents. The construction of the fifth and the seventh harmonic currents needed to cancel the torque ripple requires calibration of the magnitude and the phase of these currents, which translates to four degrees of freedom. Any error in these parameters can cause a reduction in the effectiveness of the compensation. This paper studies the sensitivity of the sixth order torque ripple reduction to these four parameters.

References

8