IEEE Transactions on Microwave Theory and Techniques · 2017 · 177 citations · 45 references
EngineeringElectrical EngineeringMechanical EngineeringInstrumentationMicrowave EngineeringSensorsAngular MeasurementAttitude DeterminationMicrowave MeasurementsMicrowave ResonatorsSatellite SensorsVibration MeasurementAmplitude ModulationAngular Displacement MeasurementChainsCoplanar WaveguidesResonator-based MeasurementRing Resonator SensorsSplit-ring ResonatorsVelocity Sensors
Accurate measurement of reaction wheel angular displacement and velocity is essential for satellite attitude control, and the proposed sensor system comprises a rotor and a stator. This study analyzes microwave, contactless, low‑cost sensors designed to measure reaction wheel motion more economically than optical encoders. The sensor uses a dielectric rotor bearing circular chains of split‑ring resonators (SRRs) and a coplanar waveguide stator loaded with SRR pairs; as the rotor rotates, the SRR chains modulate the amplitude of a continuous‑wave signal through close‑proximity coupling, altering the transmission coefficient. The resulting envelope function allows accurate angular‑velocity determination, enabling instantaneous measurement of practically unlimited rotation speeds.
The accurate measurement of the angular displacement and velocity of reaction wheels is necessary for attitude (orientation) control in space vehicles (satellites). In this paper, microwave, contactless, and low-cost (as compared to optical encoders) sensors useful for that purpose are analyzed in detail. The sensor consists of a rotor and a stator. The rotor is a disk (or a circular crown) of dielectric material, where one or several arrays of equidistant single-loop split ring resonators (SRRs) are etched along its edge, forming circular chains of hundreds of SRRs. The stator is a coplanar waveguide (CPW) also loaded with pairs of single-loop SRRs (etched in the back substrate side), with the centers located in the slot region. The sensing principle is based on the amplitude modulation of a harmonic (single-tone continuous wave) feeding signal, achieved when the chains of the rotor are displaced over the SRR pairs of the stator. Both sensor elements (rotor and stator) must be parallel oriented, with the SRR pairs of the CPW in close proximity to the SRR chains of the rotor (and rotated 180°), in order to favor their coupling. By this means, the transmission coefficient of the CPW is varied by the circular motion of the rotor, and significant amplitude modulation of the feeding signal is achieved. From the envelope function, the angular velocity can be accurately determined. With the proposed sensors, instantaneous and practically unlimited rotation speeds can be measured.
45