Journal of the Japan Institute of Metals and Materials · 1992 · 16 citations · 0 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallurgyPhase TransformationsAlloysDeformation MechanismsMetalsPlastic DeformationStrain HardeningWork HardeningDeformationDeformation BehaviorHydride FormationNickel-based AlloysPlastic Deformation BehaviorSlipStress-induced Martensitic TransformationTensile Strain
Transformation characteristics and deformation behavior of hydrogenated Ti-50.5 at%Ni alloys, which were occluded in a low pressure range of hydrogen between 1.1 and 78.5 kPa, have been studied by electrical resistivity measurement, tensile test, X-ray diffraction analysis and microstructural observation.Ms temperature of the Ti-Ni alloys decreased with an increase in hydrogen content. This corresponds to the stabilization of the parent phase during cooling, which was confirmed by X-ray diffraction: The suppression effect of hydrogen takes place on the martensitic transformation.Critical stress for slip deformation of hydrogenated Ti-Ni alloys changed with hydrogen content and thus hydrogen had a major influence on deformation behavior of those alloys. With hydrogen contents above 0.032 mol%, hardening was distinguished from softening which was pronounced in the contents from 0 to 0.032 mol%H.Hydrides were formed in hydrogen contents over 1.9 mol%. The hydride formation results in the reorientation in variants of the R phase and an increase in the lattice strains of the parent phase.