ACS Applied Materials & Interfaces · 2017 · 47 citations · 46 references
Natural SciencesMaterials EngineeringMaterials ScienceEnergy MaterialsMaterials ChemistrySemiconductor MaterialsPerovskite MaterialsPhotovoltaic DevicesPhotovoltaic MaterialsSolar Cell MaterialsSolar CellsThin Film AnnealingAnnealingAnnealing ProcessesFabricationFill FactorIndium Tin Oxide Thin FilmsOrganic-inorganic Hybrid PerovskitesPerovskite Solar CellsPower Conversion Efficiency
We report a simple, low cost, and quite effective method for achieving single-crystal-like CH 3 NH 3 PbI 3 perovskite leading to a significant enhancement in the performance and stability of inverted planar perovskite solar cells (IPSCs). By employing a merged annealing method during the fabrication of an IPSC for preparing the perovskite CH 3 NH 3 PbI 3 film, we remarkably increase the crystallinity of the CH 3 NH 3 PbI 3 film and enhance the device performance and stability. An IPSC with the indium tin oxide/poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonate)/CH 3 NH 3 PbI 3 (active layer)/[6,6]-phenyl-C 61 -butyric acid methyl ester/Al structure was fabricated using the merged annealing method and exhibited significantly enhanced performance with a high power conversion efficiency of 18.27% and a fill factor of 81.34%. Moreover, since two separate annealing processes are merged in the proposed annealing method, the fabrication step becomes much simpler and easier, leading to a reduction in fabrication costs.
46
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Julian Burschka, Norman Pellet, Soo‐Jin Moon et al. · Nature · 2013 · 9.4K citations · Full text
Natural Sciences, Materials Engineering, Materials Science +12