Magnetic shear effects on plasma transport and turbulence at high electron to ion temperature ratio in DIII-D and JT-60U plasmas

M. Yoshida, G. R. McKee, M. Murakami, B. A. Grierson, M. Nakata, E.M. Davis, A. Marinoni, Makoto Ono, T. L. Rhodes, C. Sung,

Nuclear Fusion · 2017 · 14 citations · 30 references

DOIFull text

Open access

Concepts

Abstract

Negative magnetic shear has been demonstrated in DIII-D and JT-60U to mitigate the confinement degradation typically observed with increasing the electron to ion temperature ratio (Te/Ti). In recent experiments in DIII-D negative central magnetic shear (NCS) discharges, the thermal transport in the internal transport barrier formed around the radius of minimum safety factor (qmin) remained almost constant and modestly increased in the region outside of qmin compared to the positive shear (PS) case, when Te/Ti increased from about 0.8 to 1.1 through electron cyclotron heating (ECH). The benefit of NCS extending into the region outside of min can be explained by the lower magnetic shear in the NCS plasma over the plasma radius relative to the PS plasma. Reduced confinement degradation at high Te/Ti with NCS plasmas was commonly observed in DIII-D and JT-60U. The mechanism of the different transport responses between the NCS and PS plasmas has been assessed in terms of fluctuation measurements and gyrokinetic simulations in DIII-D; NCS gave a smaller rise in the low-wavenumber broadband turbulent fluctuations with the increase in Te/Ti compared with the PS case. This is consistent with gyrokinetic simulations, which show a smaller rise in the growth rates of the ion temperature gradient mode in the NCS plasmas, with increasing Te/Ti. Gyro kinetic simulations also showed a change in the stability of electron modes with ECH applied, consistent with higher-wavenumber fluctuation measurements. Control of q-profile and magnetic shear will allow confinement improvement in future machines with dominant electron heating.

References

30