Performance of a Nano-CNC Machined 220-GHz Traveling Wave Tube Amplifier

Abstract

We report on hot test measurements of a wide-bandwidth, 220-GHz sheet beam traveling wave tube amplifier developed under the Defense advanced research projects agency (DARPA) HiFIVE program. Nano-computer numerical control (CNC) milling techniques were employed for the precision fabrication of double vane, half-period staggered interaction structures achieving submicrometer tolerances and nanoscale surface roughness. A multilayer diffusion bonding technique was implemented to complete the structure demonstrating wide bandwidth (>50 GHz) with an insertion loss of about -5 dB achieved during transmission measurements of the circuit. The sheet beam electron gun utilized nanocomposite scandate tungsten cathodes that provided over 438-A/cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> current density in the 12.5:1 ratio sheet beam. An InP HBT-based monolithic microwave integrated circuit preamplifier was employed for TWT gain measurements in the stable amplifier operation region. In the wide-bandwidth operation mode (for gun voltage of 20.9 kV), a gain of over 24 dB was measured over the frequency range of 207-221 GHz. In the high-gain operation mode (for gun voltage of 21.8 kV), over 30 dB of gain was measured over the frequency range of 197-202 GHz. High-power tests were conducted employing an extended interaction klystron.