IEEE Transactions on Biomedical Circuits and Systems · 2017 · 16 citations · 38 references
EngineeringComputer EngineeringElectrical EngineeringBiomedical Signal ProcessingMicroelectronicsNeural EngineeringDigital Signal ProcessingNeural Recording TechnologiesNeural Signal AcquisitionNeural Signal ProcessingSignal ProcessingSpiking Neural NetworksIncremental Principal Component AnalysisNeural Recording SystemsNeural Spike DetectionNeuronal Spike DetectionPhase NoiseSpike DetectionWireless Data TransmissionWireless Transmission
An 8-channel wireless neural signal processing IC, which can perform real-time spike detection, alignment, and feature extraction, and wireless data transmission is proposed. A reconfigurable BFSK/QPSK transmitter (TX) at MICS/MedRadio band is incorporated to support different data rate requirement. By using an Exponential Component-Polynomial Component (ECPC) spike processing unit with an incremental principal component analysis (IPCA) engine, the detection of neural spikes with poor SNR is possible while achieving 625× data reduction. For the TX, a dual-channel at 401 MHz and 403.8 MHz are supported by applying sequential injection locked techniques while attaining phase noise of -102 dBc/Hz at 100 kHz offset. From the measurement, error vector magnitude (EVM) of 4.60%/9.55% with power amplifier (PA) output power of -15 dBm is achieved for the QPSK at 8 Mbps and the BFSK at 12.5 kbps. Fabricated in 65 nm CMOS with an active area of 1 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , the design consumes a total current of 5~5.6 mA with a maximum energy efficiency of 0.7 nJ/b.
38