Applied Physics Letters · 2017 · 50 citations · 19 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsOptoelectronicsSemiconductor MaterialsConducting PolymersConductive PolymersOptoelectronic DevicesOrganic Electronic MaterialsOrganic SemiconductorsPhotodetectorsCharge Carrier RecombinationCharge ExtractionCharge RecombinationCharge SelectivityDark CurrentOrganic PhotodetectorsPhotodiodesSelectivity
We demonstrate the effect of anionic polyelectrolyte as a cathode interlayer to enhance charge selectivity of the electrode/semiconductor junction of organic photodiodes. Poly(styrenesulfonate) (PSS) was used as a cathode interlayer to tune the energy level of an ITO/ZnO electrode, so that hole injection can be minimized while electron extraction can be maximized. Optimized photodiodes with a PSS interlayer showed lower and flatter dark current density curves compared to the reference devices, which implies that tunneling currents at the electrode/active layer interface were dramatically suppressed. Moreover, PSS as an interlayer enabled lower charge recombination yield, as confirmed by the ideality factor and linear dynamic range analysis. As a result, we could realize the near-ideal organic photodiodes with a high performance of specific detectivity up to 3.3 × 1012 Jones at −5 V.
19
Single-junction polymer solar cells with high efficiency and photovoltage
Zhicai He, Biao Xiao, Feng Liu et al. · Nature Photonics · 2015 · 1.7K citations
Fill factor in organic solar cells
Boyuan Qi, Jizheng Wang · Physical Chemistry Chemical Physics · 2013 · 715 citations