Mineral Processing and Extractive Metallurgy Transactions of the Institutions of Mining and Metallurgy · 2017 · 34 citations · 12 references
EngineeringMaterials EngineeringMechanical Behavior Of MaterialsMetallurgyProcess DesignFeed FormulationFeed ProcessingGrain Size DistributionGrain-size AnalysisParticle SizeSize ReductionMoistureParticle Shape AnalysisParticle Size CharacterizationParticle Size Distribution AnalysisParticle Size EffectsParticle Size ReductionPowder Feedstock CharacterizationRoughness
In this study the effect of HPGR operational parameters on the dimensional properties of pellet feed was examined and optimized using factorial methodology. The operational parameters considered include feed moisture, specific pressure and roll speed. For this study, size and shape of particles with Blaine number in the range 1800–2200 cm2 g−1 was thoroughly investigated. It was deduced that increasing the specific pressure and decreasing the roll speed would result in reduction of D80 but would increase the Blaine number. The circularity, aspect ratio and roughness descriptors of the particles were measured by SEM micrographs and image analysis software. It was observed that particles tended to be angular, with elongated shape due to the inter-particle and compression breakage mechanism in the HPGR.
12