Proceedings of the Annual Conference of the IEEE Industrial Electronics Society · 2006 · 31 citations · 5 references
EngineeringComputer EngineeringElectrical EngineeringEmbedded SystemsPower ElectronicsReconfigurable ComputingDrive SystemsElectric DrivesElectric Motor Drive SystemsElectric Motor DrivesPermanent Magnet MachinesSynchronous MachinesElectric Motor SimulationMotor Drive ModelingMotor Drive SystemsPermanent Magnet Synchronous MachinesPermanent Magnet Synchronous Motor DrivesPermanent Magnet Synchronous MotorsSimulink ModelsSynchronous Machine Modeling
Presented is a real-time simulator of a permanent magnet synchronous motor (PMSM) drive implemented on an FPGA card. Real-time simulation of PMSM drives enable thorough testing of control strategies and rapid deployment of vehicular or industrial applications. The PMSM model is based on Park transform with a reference frame on the rotor and assumes sinusoidal flux induction. A 3-phase IGBT inverter drives the PMSM machine. Both models are implemented with the RT-LAB real-time simulation platform of Opal-RT Technologies using a Simulink blockset called Xilinx System Generator (XSG), and without any VHDL coding. The paper explains various aspects of the design of the motor drive models in fixed-point representation in XSG, as well as actual simulation validation against a standard PMSM drive model built in Simulink. The PMSM drive, along with a test source for the pulse width modulation, is coded for an FPGA card. The model has user-selectable dead time, modulation index, source angle offset, and frequency. The overall model compilation and simulation is entirely automated by RT-LAB. The drive can also run in a closed loop with a controller executing on a CPU of a real-time simulator. The final PMSM drive model runs with a 20-ns integration time step, allows for time multiplexing of d-q values, and has an I/O latency of 310 ns (250 ns for the PMSM machine alone). The drive is directly connected to RT-LAB digital inputs and analog outputs (1 microsecond settling time) on the FPGA card and has a resulting total hardware-in-the-loop latency of 1.31 microseconds
5
Dynamic overmodulation characteristics of triangle intersection PWM methods
Ahmet M. Hava, Seung‐Ki Sul, R.J. Kerkman et al. · 1997 · 19 citations