IEEE Journal of Solid-State Circuits · 2016 · 59 citations · 24 references
EngineeringElectrical EngineeringAnalog ElectronicsMicroelectronicsMicrowave EngineeringBeamformingCmos Circuit DesignLow-noise Circuit DesignMicrowave AmplifiersMillimeter-wave CommunicationsRadio-frequency Integrated CircuitsAverage GainBicmos TechnologyFront-end DesignLow-noise AmplifiersLow-noise Differential AmplifiersNoise FigurePhased Array BeamformingSige Bicmos Design
This paper presents a 28-GHz four-channel phased-array receiver in 130-nm SiGe BiCMOS technology for fifth-generation cellular application. The phased-array receiver employs scalar-only weighting functions within each receive path and then global quadrature power combining to realize beamforming. We discuss both the theory and nonidealities of this architecture and then circuit design details for our phased-array front-end prototype. Differential low-noise amplifiers and dual-vector variable-gain amplifiers are used to realize each front end in a compact area of 0.3 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> . Across 4-b phase settings, each array element achieves 5.1-7 dB noise figure, -16.8 to -13.8 dBm input-referred 1-dB compression point, and -10.5 to -8.9 dBm input-referred third-order intercept point. The average gain per element is 10.5 dB at 29.7 GHz, whereas the 3-dB bandwidth is 24.5% (26.5-33.9 GHz). Root-mean-squared gain and phase errors are less than 0.6 dB and 5.4° across 28-32 GHz, respectively, and all four elements provide well-matched and well-isolated responses. Power consumption is 136 mW per element, equaling 546 mW for the four-element array.
24
Jeffrey G. Andrews, Stefano Buzzi, Wan Choi et al. · IEEE Journal on Selected Areas in Communications · 2014 · 8.2K citations · Full text
C.H. Doan, Sohrab Emami, Ali M. Niknejad et al. · IEEE Journal of Solid-State Circuits · 2005 · 710 citations