2006 · 14 citations · 2 references
EngineeringElectrical EngineeringMicroelectronicsMicrowave EngineeringWireless CommunicationsHigh-frequency Semiconductor DevicesIntegrated Circuit DesignMicrowave AmplifiersMicrowave Integrated CircuitsMicrowave Semiconductor DevicesRadio-frequency Integrated CircuitsAmbient Temperature EffectsGaas Microwave Integrated CircuitsGaas Monolithic Microwave Integrated CircuitsGainLow-noise AmplifiersMicrowave Module IntegrationMonolithic Microwave Integrated Circuit DesignNoise Figure
A LNA module, integrated microwave assembly was developed for Ka-band communications satellite payload in the frequency range of 29.6 /spl sim/ 30.0 GHz. The noise figure of the module has been recorded as low as 1.9dB at ambient temperature. The module has been tested over temperature range of -15 /spl sim/ +71/spl deg/C and shows 33.3dB of gain within 0.7dBp-o variation as it has the function of gain compensation. The mass of the module is 94grams that provides the flexibility in payload assembly. Two low noise amplifier MMIC chips were used in the module and those chips had been fabricated using 0.15 /spl mu/m GaAs pHEMT process. This paper describes the design, fabrication and performance of the LNA module. This will include the MMIC design, the mechanical design of module, and the design of waveguide-to-microstrip transition.
2
A high gain, low power MMIC LNA for Ka-band using InP HEMTs
C.W. Pobanz, M. Matloubian, Lan N. Nguyen et al. · 2003 · 19 citations
A space-qualified, hermetically-sealed, Ka-band LNA with 2.0dB noise figure
James J. Sowers, M. J. Willis, T. Tieu et al. · 2002 · 10 citations
Engineering, Aerospace Engineering, Electrical Engineering +17