Pulsed Electrokinetic Removal of Chromium, Mercury and Cadmium from Contaminated Mixed Clay Soils

Abstract

Electrokinetic remediation (EKR) processes are energy intense systems as they are mainly run under continuous constant current supply mode. In this study, pulsed electrokinetic remediation (PEKR) technique was employed for the removal of Cd, Hg and Cr from mixed contaminated natural clay and bentonite soils. The effects of voltage gradient, pulse duty cycle and bentonite/clay ratio on the simultaneous removal efficiencies of the heavy metals and specific energy consumption were investigated. Fifteen (15) PEKR experiments were conducted according to Box–Behnken design (BBD) with each experiment allowed to continuously run for 21 days. Increase in the proportion of the bentonite significantly decreased the removal efficiency of the heavy metals while having insignificant effect on the energy consumption. Conversely, increase in both voltage gradient and pulse duty cycle increased the heavy metals removal efficiencies, though at the expense of increase in energy consumption due to combine effects of increase in the soil electrical conductivity, amount of current needed to sustain the applied voltage gradient as well as the raise in the soil pH. The maximum achievable removal efficiencies for Cd, Hg and Cr were 21.87, 78.06 and 89.64% respectively. The specific energy consumption significantly increased from the range of 91.67–154.17 kwh/m3 to 1700–2441.67 kwh/m3 as a result of combined effect of increasing voltage gradient and pulse duty cycle. This demonstrated that effective PEKR could be achieved with significance reduction in the energy consumption via appropriate selection of pulse duty and voltage gradient for clay soils of different proportion of montmorillonite.