International Journal of Ambient Energy · 2015 · 90 citations · 31 references
EngineeringMechanical EngineeringEnergy SystemsHeat TransferThermal AnalysisEnergy ConversionEnergy StorageSolar Energy SystemsSolar RadiationSolar Thermal SystemsThermal ManagementEvacuated Tube CollectorsPhase Change Material Thermal ManagementSensible Heat StorageSolar Energy StorageSolar Radiation Heat TransferSolar Thermal Power GenerationThermal Energy StorageThermal Storage
An experimental investigation of an evacuated tube solar air collector coupled to a latent thermal energy store for generating hot air when no solar radiation is incident was undertaken. Acetamide was used as a phase change material (PCM). The latent thermal energy store was integrated with the manifold of the solar collector and water was used as the working fluid transferring solar gain to the air being heated. The maximum measured temperature differential between the heated air and the ambient air was 37°C and 20.2°C during conditions of incident and non-incident solar radiation, respectively. This occurred using a circular fin configuration at a flow rate of 0.018 kg s−1. The efficiency at low (0.018 kg s−1) air flow rates was 0.05–0.50 times less as compared to high (0.035 kg s−1) air flow rates. This system has advantages over systems using sensible storage as it can be used after sunset due to better heat storing capacity of the PCM.
31