Applied Optics · 2016 · 12 citations · 12 references
EngineeringPhysicsAcousticsHearing SciencePhotonicsAcoustic MeasurementAcoustic SensorsFiber OpticsNoiseNoise MeasurementOptical FibersFabry-perot ResonatorsFiber Bragg GratingsFiber-optic SensingMicrophone SensitivityMicrophonesNoise SensitivitySignal-to-noise RatioTransducer Design
We present an all-fiber design for a microphone using a fiber Bragg grating Fabry–Perot resonator attached to a diaphragm transducer. We analytically model and verify the fiber–diaphragm mechanical interaction, using the Hänsch–Couillaud readout technique to provide necessary sensitivity. We achieved a noise-equivalent strain sensitivity of 7.1×10−12  ϵ/Hz, which corresponds to a sound pressure of 74  μPa/Hz at 1 kHz limited by laser frequency noise and yielding a signal-to-noise ratio of 47±2  dB with a 1 Pa drive at 1 kHz, in close agreement with modeled results.
12
Laser phase and frequency stabilization using an optical resonator
R. W. P. Drever, J. L. Hall, Frank V. Kowalski et al. · Applied Physics B · 1983 · 3.8K citations
Natural Sciences, Physics, Optics +15
Fiber-optic acoustic pressure sensor based on large-area nanolayer silver diaghragm
Feng Xu, Jinhui Shi, Kui Gong et al. · Optics Letters · 2014 · 218 citations · Full text
Manipulation of Group-Velocity-Locked Vector Solitons From Fiber Lasers
Xinxin Jin, Zhichao Wu, Lei Li et al. · IEEE photonics journal · 2016 · 207 citations · Full text
Demonstration of a passive subpicostrain fiber strain sensor
J. H. Chow, D. E. McClelland, Malcolm B. Gray et al. · Optics Letters · 2005 · 104 citations · Full text