Nonlinear behavior of soil sediments identified by using borehole records observed at the Ashigra Valley, Japan

Abstract

Abstract We evaluate the nonlinear behavior of soil sediments during strong ground shaking based on the identification of their S-wave velocities and damping factors for both the weak and strong motions observed on the surface and in a borehole at Kuno in the Ashigara Valley, Japan. First we calculate spectral ratios between the surface station KS2 and the borehole station KD2 at 97.6 m below the surface for the main part of weak and strong motions. The predominant period for the strong motion is apparently longer than those for the weak motions. This fact suggests the nonlinearity of soil during the strong ground shaking. To quantify the nonlinear behavior of soil sediments, we identify their S-wave velocities and damping factors by minimizing the residual between the observed spectral ratio and the theoretical amplification factor calculated from the one-dimensional wave propagation theory. The S-wave velocity and the damping factor h (≈(2Q)−1) of the surface alluvial layer identified from the main part of the strong motion are about 10% smaller and 50% greater, respectively, than those identified from weak motions. The relationships between the effective shear strain (=65% of the maximum shear strain) calculated from the one-dimensional wave propagation theory and the shear modulus reduction ratios or the damping factors estimated by the identification method agree well with the laboratory test results. We also confirm that the soil model identified from a weak motion overestimates the observed strong motion at KS2, while that identified from the strong motion reproduces the observed. Thus, we conclude that the main part of the strong motion, whose maximum acceleration at KS2 is 220 cm/sec2 and whose duration is 3 sec, has the potential of making the surface soil nonlinear at an effective shear strain on the order of 0.1%. The S-wave velocity in the surface alluvial layer identified from the part just after the main part of the strong motion is close to that identified from weak motions. This result suggests that the shear modulus recovers quickly as the shear strain level decreases.