Radio Science · 2016 · 16 citations · 12 references
EngineeringElectrical EngineeringAntennasInstrumentationRemote SensingCalibrationRadar AntennasRadar CalibrationRadar Signal ProcessingRadar SystemsSensor CalibrationBistatic RadarCalibration Target DesignControlled Environment TestingCorner ReflectorsPassive RadarRadar Cross Section CalibrationRadar Cross Section MeasurementRadar Cross-section
Abstract Either passive calibration targets are expensive and complex to manufacture or their bistatic radar cross section (RCS) levels are significantly lower than the monostatic RCS levels of targets such as spheres, dihedral, and trihedral corner reflectors. In this paper the performance of an active calibration target with relative high bistatic RCS values is illustrated as a reference target for bistatic RCS measurements. The reference target is simple to manufacture, operates over a wide frequency range, and can be configured to calibrate all four polarizations (VV, HH, HV, and VH). Bistatic RCS measurements of canonical targets, performed in a controlled environment, are calibrated with the reference target and the results are compared to simulated results using FEKO.
12
Antenna theory, analysis, and design
W. Croswell · IRE Transactions on Telemetry and Remote Control · 1982 · 8.6K citations
Bistatic scattering characterization of complex objects
R.L. Eigel, Peter J. Collins, A.J. Terzuoli et al. · IEEE Transactions on Geoscience and Remote Sensing · 2000 · 48 citations
Natural Sciences, Physics, Antennas +15