Journal of Biomedical Materials Research Part B Applied Biomaterials · 2016 · 19 citations · 49 references
Natural SciencesBiomedical EngineeringMaterials ScienceBiocompatibilityBiomaterialsCorrosion ScienceCalcium Phosphate BiomaterialsCalcium Phosphate MaterialsCorrosion-resistant MaterialsImplant MaterialsImplantable BiomaterialsSurface Modification Of ImplantsBioceramic CoatingsDegradationImplant CoatingsImplant DegradationMagnesium AlloysMagnesium-based ImplantsMetallic ImplantsPhosphate Conversion Coatings
Magnesium alloys have promising mechanical and biological properties for the development of degradable implants. However, rapid implant corrosion and gas accumulations in tissue impede clinical applications. With time, the implant degradation rate is reduced by a highly biocompatible, phosphate-containing corrosion layer. To circumvent initial side effects after implantation it was attempted to develop a simple in vitro procedure to generate a similarly protective phosphate corrosion layer. To this end magnesium samples were pre-incubated in phosphate solutions. The resulting coating was well adherent during routine handling procedures. It completely suppressed the initial burst of corrosion and it reduced the average in vitro magnesium degradation rate over 56 days almost two-fold. In a small animal model phosphate coatings on magnesium implants were highly biocompatible and abrogated the appearance of gas cavities in the tissue. After implantation, the phosphate coating was replaced by a layer with an elemental composition that was highly similar to the corrosion layer that had formed on plain magnesium implants. The data demonstrate that a simple pre-treatment could improve clinically relevant properties of magnesium-based implants. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1622-1635, 2017.
49
In vivo corrosion of four magnesium alloys and the associated bone response
Frank Witte, V. Kaese, H. Haferkamp et al. · Biomaterials · 2004 · 2.4K citations
Natural Sciences, Materials Engineering, Materials Science +16
In vitro and in vivo corrosion measurements of magnesium alloys
Frank Witte, J. Fischer, J. Nellesen et al. · Biomaterials · 2005 · 1.4K citations
Natural Sciences, Materials Engineering, Materials Science +14
In vitro corrosion and biocompatibility of binary magnesium alloys
Xuenan Gu, Yufeng Zheng, Shengping Zhong et al. · Biomaterials · 2008 · 1.3K citations
Natural Sciences, Materials Engineering, Materials Science +13
Preparation and assessment of revised simulated body fluids
Ayako Oyane, Hyun‐Min Kim, Takuo Furuya et al. · Journal of Biomedical Materials Research Part A · 2003 · 1.1K citations