Improved Maximum-Torque-Per-Ampere Algorithm Accounting for Core Saturation, Cross-Coupling Effect, and Temperature for a PMSM Intended for Vehicular Applications

Ali Rabiei, Torbjörn Thiringer, Mikael Alatalo, Emma Arfa Grunditz

IEEE Transactions on Transportation Electrification · 2016 · 122 citations · 22 references

Concepts

Abstract

This paper presents an improved method of deriving the ideal maximum-torque-per-ampere (MTPA) angle for a permanent-magnet synchronous machine (PMSM). The algorithm accounts for core saturation and cross coupling of the direct- and quadrature-axis magnetic flux. In addition, the impact of various temperatures is also investigated. The algorithm is demonstrated to provide a <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$d{-}q$</tex-math></inline-formula> current reference angle that is very close to the real MTPA-angle for the whole operating range. It is found that if the current dependency of the equivalent circuit machine parameters such <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$L_d$</tex-math></inline-formula> , <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$L_q$</tex-math></inline-formula> , and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\Psi_m$</tex-math></inline-formula> is updated for each optimization iteration step in an MTPA algorithm rather than being accounted for directly in the optimization, the MTPA angle is predicted up to 7° too low for the investigated machine. However, with the proposed MTPA-angle method here, this discrepancy is eliminated. Moreover, the consequence of utilizing the derived improved algorithm here is that the losses at the peak torque operating point is 6% lower than without the full optimization. This leads to an enhanced take-off ability by increasing the torque at the rated current by up to 3.6%.

References

22