ACS Catalysis · 2015 · 141 citations · 26 references
Natural SciencesChemistryMaterials ScienceCatalysisMaterials ChemistrySurface ChemistryAtomic Layer DepositionCatalyst CharacterizationCatalyst StabilityCatalytic MaterialsSupported CatalystsSurface CatalysisCatalyst CalcinationCatalyst Stability EnhancementCatalyst Surface EngineeringCatalytic NanomaterialsMetal Oxide CatalystsMethane OxidationSupported Metal Oxide CatalystsThermal Stability
The effect of modifying Pd/Al 2 O 3 catalysts by atomic layer deposition of 1 nm ZrO 2 films was studied. For deposition on oxidized, PdO/Al 2 O 3 catalysts, TEM imaging, EDS mapping, and metal-dispersion measurements confirmed the presence of the thin ZrO 2 over both the Al 2 O 3 support and the metal particles. The ZrO 2 films were surprisingly stable, forming a well-crystallized phase only above 1173 K. The ZrO 2 coating over the PdO particles created a semicore–shell-like structure that stabilized the metal against sintering in air at 1073 K. Steady-state, methane oxidation rates on unmodified PdO/Al 2 O 3 decreased with increasing catalyst calcination temperature, but rates on the ZrO 2 -covered surfaces increased with increasing calcination temperature.
26
Catalyst Design with Atomic Layer Deposition
Brandon J. O’Neill, David H. K. Jackson, Jechan Lee et al. · ACS Catalysis · 2015 · 775 citations · Full text
Natural Sciences, Chemical Engineering, Materials Science +17
CATALYTIC COMBUSTION OF METHANE OVER PALLADIUM-BASED CATALYSTS
Dragoş Ciuparu, Maxim Lyubovsky, Eric I. Altman et al. · Catalysis Reviews · 2002 · 596 citations