38th Structures, Structural Dynamics, and Materials Conference · 1997 · 16 citations · 0 references
EngineeringAerospace EngineeringSystems EngineeringAstrodynamicsSpacecraft DesignVibrationSpacecraft StructuresVibration ControlVibration IsolationActive Vibration IsolationFlightFrequency-dependent IsolationIsolation Performance MetricsIsolation PlatformsIsolation System DampingIsolation System StabilityVibration Isolation Design
This paper gives an overview of the STABLE (Suppression of Transient Acceleration By LEvitation) actively-controlled electro-magnetic microgravity isolation system developed and successfully flight-tested in orbit on the shuttle during October, 1995. STABLE, fitting entirely within a shuttle middeck locker, was developed under a cooperative agreement between National Aeronautics and Space Administration, Marshall Space Flight Center, and McDonnell Douglas Aerospace. The flight hardware was designed, fabricated, integrated, tested, and delivered for launch during a fivemonth period. A description of the operational principles, design and performance criteria as well as the hardware design itself is presented. Results of the analysis of measured flight data are presented to provide an evaluation of system performance parameters, including acceleration attenuation, assessment of sway space, system power consumption, and other factors critical to the performance of an isolation system. Lessons learned and potential design improvements and evolutions will be discussed. Preliminary analyses show that the acceleration environment aboard STABLE's isolated platform was attenuated by a factor of more than 17 between 0.1 and 100 Hz compared to ambient levels. STABLE's isolation performance appears to be limited by the noise in the accelerometers used to sense the isolated platform's acceleration and by disturbances at multiples of 10 Hz. INTRODUCTION NASA, academic, and commercial consortia are all planning on-orbit microgravity experimentation and research activities aboard virtually all manned spacecraft, including shuttle (STS), Mir, and International Space Station (ISS). These activities include investigations into protein crystal growth, semiconductor fabrication, combustion, and fluid mechanics. The designers of many of these sensitive microgravity payloads are anticipating extended quiescent periods, of up to 30 days duration, during which experimentation will be carried out undisturbed by base acceleration or g-jitter. Mechanical disturbances from crew activities, onboard equipment, acoustics, ventilation, thermal creaking, and other sources threaten to disrupt the microgravity environment for these sensitive payloads, which could reduce scientific return or production quality. Figure 1 compares the predicted vibration environment aboard ISS with the desired environment. Note that ISS analytical predictions do not include vibrations induced by fluid flow, air currents, ventilation, acoustics, experiment equipment (such as pumps, fans, switches, valves), and thermal creak. Although crew disturbances are simulated, no means exist to control crew activities. Many of these disturbance sources are especially significant at lower frequencies, where the microgravity requirement is the most demanding. One solution to this problem is vibration isolation. With these disturbances in mind, over the past five years, McDonnell Douglas Aerospace (MDA) has pursued an independent research and development program on vibration isolation. Beginning in early 1995, MDA