Overview of Hypersonic Inflatable Aerodynamic Decelerator Large Article Ground Test Campaign

Alan M. Cassell, Gregory Swanson, Roger K. Johnson, Stephen J. Hughes, F. McNeil Cheatwood

2011 · 11 citations · 5 references

Concepts

Abstract

The aeroelastic behavior of large-scale hypersonic inflatable aerodynamic decelerators (HIADs) will be investigated by wind tunnel testing to develop analysis and design tools and to advance scalable manufacturing and assembly technologies for inflatable aeroshells. Three stacked toroid, 60 degree halfangle sphere cone HIAD test articles of 3, 6 and 8.3 m in diameter will be tested in subsonic flow fields that produce flight-like aerodynamic loading. The test articles are assembled from inflatable torus segments composed of fiber reinforced thin films, which are joined together with high strength textile woven structural straps. A poly vinyl chloride coated structural fabric will be sewn together to produce an aerodynamic skin that covers the inflatable aeroshell structure. The inflatable aeroshell test articles will incorporate many flight-like design features including rigid centerbody interface attachment and load distributing strap arrangements. Each HIAD test article will be swept through +/- 25 degree yaw angles while varying the inflatable structure internal pressure and test section dynamic pressure. To correlate fluid structure interaction models full-field photogrammetry and surface pressure measurements will be used to characterize local and global aeroshell deformation and pressure distribution. The verification of fluid structure interaction models enables the establishment of baseline aeroelastic performance at relevant scales. This paper discusses the objectives, planning and limitations of testing large diameter HIADs in the National FullScale Aerodynamics Complex 40 x 80 foot test section. An overview of the design reference mission, test approach, test design, instrumentation and model verification is discussed.

References

5