Prediction of the Nonlinear Aerodynamic Characteristics of Tandem-Control and Rolling-Tail Missiles

Daniel J. Lesieutre, John Love, M. F. E. Dillenius

AIAA Atmospheric Flight Mechanics Conference and Exhibit · 2002 · 24 citations · 5 references

Concepts

Abstract

fin deflection angle, deg Predicted nonlinear aerodynamic characteristics of roll angle, deg several canard-body-tail missile models are presented fin set roll angle with respect to body-fixed and compared to wind tunnel data. Configurations with vertical axis, positive right wing down, deg both fin sets deflectable (tandem-control) are analyzed to investigate the effectiveness of canard-only, tail-only, INTRODUCTION and combined tandem-control effectiveness for both vertical translation and pitch attitude changes. Recently, experimental data obtained by NASA Configurations with canard control fins and free-rolling personnel has become available for tandem-control tail fin sections are investigated for their ability to missile configurations. These data exhibit many minimize vortex-induced lateral forces and moments nonlinear characteristics associated with vortical associated with canard control. Engineeringand interaction between fin sets. In addition, there are intermediate-level aerodynamic prediction codes are several sets of experimental data taken for canardused for the analysis. Results presented include high controlled missile models with fixed and free-rolling tail angle of attack aerodynamics, induced lateral forces, sections. These data also exhibit nonlinearities tandem-control fin deflections, estimates of free rotating associated with strong canard-tail vortical interference fin section performance, and rotational damping including induced lateral forces and moments. An initial estimates. Good agreement with experimental data is investigation of the ability of an engineering-level obtained for a variety of nonlinear and asymmetric flight aerodynamic prediction code to predict the conditions. characteristics of these configurations has been LIST OF SYMBOLS configurations in more detail, using both engineeringa body radius at fin mid-rootchord level and intermediate-level aerodynamic prediction AR aspect ratio (two fins joined at root) codes. C body crossflow drag coefficient dc C rolling moment/q S l TECHNICAL APPROACH l ∞ R R C roll-damping coefficient; ∂C /∂(pl /2V ) lp l R ∞ C pitching moment/q S l ; positive nose up This section summarizes the experimental data and the m ∞ R R C normal force/q S prediction methodology employed in this investigation. N ∞ R C fin normal force/q S The estimation of rolling-tail section properties is also NF ∞ R C body dC /d at =0 presented. N N D body diameter, maximum L body length DESCRIPTION OF MISL3 l ,L reference length R REF p,q,r rotational rates, rads/sec The engineering-level missile aerodynamic prediction s exposed fin span s fin semispan measured from body centerline m S reference area R x center of pressure CP x moment center MC included angle of attack, deg c _____________________ Senior Research Engineer, Senior Member AIAA *

References

5