Industrial & Engineering Chemistry Research · 2014 · 182 citations · 12 references
EngineeringChemical EngineeringChemistryCombustionInorganic ChemistryReaction EngineeringCombustion KineticsCombustion ProcessesIron OxidesMagnetic OxidesOxidation-reduction ReactionsSurface OxidationActivation EnergyHematiteIron OxidationMagnetiteOxidationOxidation BehaviorOxidation KineticsOxidation Mechanisms
Thermogravimetric analysis (TGA) of magnetite (Fe 3 O 4 ) oxidation was conducted at temperatures ranging from 750 to 900 °C over 10 oxidation cycles. Oxidation experiments were carried out in a continuous stream of air for period of 30 min. The oxidized magnetite (Fe 3 O 4 ), which resulted in formation of hematite (Fe 2 O 3 ), was then reduced by using continuous stream of CO (5% and 10%) with N 2 balance. The rate of oxidation was determined by the oxygen weight gain. Analysis of the data indicated that the oxidation behavior followed a two-stage process. The initial oxidation, which was very fast, took place in 2 min and was described using nucleation and growth processes with a low activation energy of about 4.21 ± 0.45 kJ/mol. As the reaction developed within the surface, oxygen transport through the product layer become the rate-controlling step with activation energy of 53.58 ± 3.56 kJ/mol.
12
Development of Cu-based oxygen carriers for chemical-looping combustion
Luis F. de Diego, Francisco García‐Labiano, Juan Adánez et al. · Fuel · 2004 · 388 citations · Full text