Energy & Fuels · 2016 · 27 citations · 25 references
Natural SciencesChemistryMaterials ScienceInorganic ChemistrySurface ChemistrySurface ScienceChemical BondingChemical Reaction KineticsCombustion KineticsSurface Reaction KineticsSurface ReactionsChloride ChemistryChlorine ActivationChlorine ChemistryTemperature-programmed Desorption
Secondary reactions of hydrogen chloride (HCl) during high-temperature combustion processes were elucidated using a model carbon prepared from a commercially available phenol resin. This resin was O 2 -activated, followed by doping with K +, Ca 2+, Cu 2+, or Zn 2+, and subsequently exposed to a stream of 100 ppm of HCl in N 2 at 500 °C, during which HCl reacts with the carbon samples to form surface chlorine species. In the absence of metal cations, the extent of reaction increases almost linearly up to 500 °C as the number of carbon active sites, determined by temperature-programmed desorption, increases. The addition of Ca, Cu, or Zn but not K significantly promotes the formation of carbon sites as well as the reaction with HCl, with the latter effect increasing in the order of Ca < Cu < Zn on a molar basis. Cl 2p X-ray photoelectron spectroscopy (XPS) data show that inorganic chlorides of Ca, Cu, and Zn are formed and that the organic Cl/C ratio is 2.0–2.3 times greater when using these additives. It is thus evident that the addition of Ca, Cu, or Zn can promote the formation of organic chlorine species. Possible mechanisms for the Ca-, Cu-, and Zn-enhanced formation of carbon active sites and organic chlorine forms are discussed on the basis of the results of XPS and temperature-programmed desorption analyses.
25
Handbook of X-Ray Photoelectron Spectroscopy
J. F. Moulder · Medical Entomology and Zoology · 1995 · 23.7K citations
Brigitte Stöhr, H.P. Boehm, Robert Schlögl · Carbon · 1991 · 494 citations