Waste Management & Research The Journal for a Sustainable Circular Economy · 2014 · 201 citations · 27 references
EngineeringChemical EngineeringMaterials EngineeringInorganic ChemistryMetallurgyResource RecoveryBattery MaterialsHeavy Metal RemediationHydrometallurgical ProcessingMetal RecoveryRecyclingBattery RecoveryBattery RecyclingHydrometallurgical Metal RecoveryHydrometallurgical RecoveryLeachingLithium-ion BatteriesLithium-ion Battery RecyclingMetal Leaching
In this paper, a hydrometallurgical process has been proposed to recover valuable metals from spent lithium-ion batteries in citric acid media. Leaching efficiencies as high as 97%, 95%, 94%, and 99% of Ni, Co, Mn, and Li were achieved under the optimal leaching experimental conditions of citric acid concentration of 2 mol L(-1), leaching temperature of 80 °C, leaching time of 90 min, liquid-solid ratio of 30 ml g(-1), and 2 vol. % H2O2. For the metals recovery process, nickel and cobalt were selectively precipitated by dimethylglyoxime reagent and ammonium oxalate sequentially. Then manganese was extracted by Na-D2EHPA and the manganese-loaded D2EHPA was stripped with sulfuric acid. The manganese was recovered as MnSO4 in aqueous phase and D2EHPA could be reused after saponification. Finally, lithium was precipitated by 0.5 mol L(-1) sodium phosphate. Under their optimal conditions, the recovery percentages of Ni, Co, Mn, and Li can reach 98%, 97%, 98%, and 89%, respectively. This is a relatively simple route in which all metal values could be effectively leached and recovered in citric acid media.
27
Development of a metal recovery process from Li-ion battery wastes
Shun Myung Shin, Nak Hyoung Kim, Jeong-Soo Sohn et al. · Hydrometallurgy · 2005 · 515 citations
Engineering, Chemical Engineering, Materials Engineering +14