2017 · 20 citations · 33 references
EngineeringChemical EngineeringPetroleum EngineeringEnhanced Oil RecoveryReservoir EngineeringReservoir OperationsConformance ControlFoam FloodingFoam-assisted RecoveryMobility ControlCarbonate Reservoir ApplicationsFoam ControlFoam FormationFoam InjectionFoam Mobility ControlFoam StabilityFoaming BehaviorReservoir Contact Optimization
Abstract Carbonate reservoirs’ extreme heterogeneity in the form of fracture corridors and super-permeability thief zones present challenges to the efficient sweep of oil in both secondary and tertiary recovery operations. In such reservoirs, conformance control is crucial to ensure injected water and any EOR chemicals optimally contact the remaining oil with minimal throughput. Foam-based conformance control is a relatively new technology especially its use for in-depth diversion in high salinity high temperature conditions. In this work, a laboratory study was conducted to develop and evaluate a foam-based conformance control technology for application in a high salinity and high temperature carbonate. Foaming agents were first screened for their suitability with regard to reservoir temperature and salinity where properties such as foamability and foam stability were measured. The best performing surfactants were then used to study the mobility reduction across a core composite at reservoir temperature and pressure. Foam stability and decay were also investigated in those permeability reduction experiments. Brine and crude oil were injected after foam formation and pressure drops and sustainability of mobility reduction were quantified. The improvement in reservoir contact and hence oil recovery were examined by oil displacement experiments conducted in specially prepared heterogeneous composites. For the studied conditions of high salinity and high temperature, foaming agents of the amphoteric family as well as a special blend were found suitable in terms of salt tolerance and foam stability. The mobility reduction due to foam was 12 times without oil and 6 times in the presence of oil. Oil recovery improvement with foam application was also found to be significant. These results demonstrate the potential of the identified foam system and its favorable impact on sweep efficiency despite the harsh salinity and temperature conditions of the studied carbonate reservoir.
33
George J. Hirasaki · Journal of Petroleum Technology · 1989 · 252 citations
Engineering, Petroleum Engineering, Enhanced Oil Recovery +13
Visualization of improved sweep with foam in heterogeneous porous media using microfluidics
Kun Ma, Rachel Liontas, Charles A. Conn et al. · Soft Matter · 2012 · 225 citations