30th Plasmadynamic and Lasers Conference · 1999 · 30 citations · 6 references
Natural SciencesNuclear EngineeringPhysicsFluid DynamicsHeat TransferPlasma PhysicsHigh-temperature PlasmasPlasma ConfinementPlasma SimulationPlasma TransportPlasma-wall InteractionsSpace PlasmasExperimental CharacterizationExperimental Uncertainty AnalysisHeat Flux MeasurementOperating Envelope AnalysisOperating Envelope DeterminationTest Bench DesignTest Bench DevelopmentTest Bench Validation
The present paper deals with the experimental determination of the operating envelope of the Plasmatron facility, designed and built at the von K&m&n Institute for Fluid Dynamics as the test bench of the European Space Agency to perform testing of TPS materials before their use in flight. As such the prime requisite of the facility is its capacity to reach specified values of stagnation pressure and catalytic cold wall stagnation point heat flux. These two variables are measured using a water-cooled Pitot probe and a steady-state heat flux probe. The paper contains the description of these probes and details about their use, as well as an analysis of experimental uncertainty. The results of the envelope exploration are presented and it is shown that the facility reaches and outdoes its basic requirements. The experimental results are also compared to the values predicted by a quasi-one-dimensional nozzle code of a plasma flow in chemical equilibrium. It is shown that the experimental values agree well with the predicted values. Results of measurements at various positions of the plasma jet are also reported. The decrease of heat flux and dynamic pressure with axial distance from the torch is essentially linear. The onedimensional model was shown to fail to predict the effect of mass flow rate, due to strong twodimensional effects in the jet. Perspectives of supersonic operation are examined in view of the pumping capacity. A brief description of the facility is also part of the report.
6