Physicomechanical Characterization of Basement Rocks for Construction Aggregate: A Case Study of Kajuru Area, Kaduna, Nigeria

Akeem Amuda, O. A. U. Uche, Abdulgafar K. Amuda

IOSR Journal of Mechanical and Civil Engineering · 2014 · 13 citations · 12 references

DOIFull text

Open access

Concepts

Abstract

This study evaluates the physical, mechanical and in-situ properties of the rock aggregates in Kajuru, Kaduna State, Nigeria as sources of aggregate for construction purpose. The uniaxial compressive strength was determined by using Universal Testing Machine to crush cored samples and Schmidt rebound number by Schmidt hammer apparatus. While the engineering destructive tests were carried out on aggregates using various apparatus. Na 2 SO 4 solution was used for soundness test and glass jar for determination of specific gravity. The results indicate that specific gravity ranges from 2.48 to 2.88, the moisture content of samples are within 2%. The UCS ranges from 95.76Mpa to 169.70Mpa while the Schmidt rebound number ranges from 29.4 to 35.3. Comparing the Los Angeles abrasion, impact and crushing value obtained from the laboratory destructive test with the B.S standards, most of the rock can be used for construction works. The results also indicate that there is direct proportional relationship between compressive strength with Schmidt rebound number and specific gravity. Inverse relationship exists between moisture content with specific gravity and compressive strength. The physical and geotechnical properties were found to be dependent on the chemical and petrographic characteristics of the rock.

References

12