Aqueous, Screen-Printable Paste for Fabrication of Mesoporous Composite Anatase–Rutile TiO<sub>2</sub>Nanoparticle Thin Films for (Photo)electrochemical Devices

Amrita Yasin, Fuqiang Guo, George P. Demopoulos

ACS Sustainable Chemistry & Engineering · 2016 · 26 citations · 33 references

Concepts

Abstract

Mesoporous TiO 2 films are employed in solar cells, lithium ion batteries, and air and water purification systems, to name a few applications. Film fabrication via coating the substrate with an organic suspension or paste carrying TiO 2 nanoparticles is a common method. To lessen the adverse environmental impact, use of water as a solvent and nontoxic chemicals is being preferred over commonly used organic components. In this research, a water-based, nano-TiO 2 printable paste formulation with polyethylene glycol (MW 20 000) and propylene glycol was developed and seamlessly interfaced with TiO 2 aqueous synthesis for sustainable manufacturing. The innovative combination of propylene glycol and polyethylene glycol is demonstrated to lead to improved paste rheology and sintered film properties. Dye-sensitized solar cells were assembled from the screen-printed films, and the effect of film surface area and porosity on photovoltaic performance was studied. The new aqueous-based paste yielded comparable power conversion efficiency to benchmark organic-based paste made of α-terpineol, ethyl cellulose, and ethanol, opening the avenue for lower cost, green fabrication of mesoporous thin film electrodes.

References

33