The Effects of Air Bypassing in Timber Kilns on Fan Power Consumption

Tag Langrish, RB Keey

Chemeca 96: Excellence in Chemical Engineering; 24th Australian and New Zealand Chemical Engineering Conference and Exhibition; Proceedings · 1996 · 10 citations · 0 references

Concepts

Abstract

High-temperature drying of softwood timber, particularly Pinus radiata, in Australia and New Zealand, is becoming a well-established technology for processing structural lumber. The air velocities in kilns drying softwood timber are substantial (above 3 m s{-1}), and fan power consumption contributes a small but significant fraction (3-5%) of the total energy costs. The way in which the timber is stacked within these kilns has important implications for energy consumption, since air may avoid passing between the boards and flow around the stack due to gaps which are difficult to prevent completely. The air which bypasses the stack does not contribute to the drying of the timber, so the energy used to pump this bypass fraction is wasted in terms of drying. Here we report an investigation to estimate the degree of bypassing for stacks within a standard high-temperature kiln layout, using a Computational Fluid Dynamics (CFD) program (CFDS-FLOW3D) to model the air-flow patterns inside the kiln. The pressure drop predictions of the CFD program agree well with data from a small stack of timber in a laboratory kiln over a range of air velocities up to 7 m s'1. This CFD program has been used to assess a situation where the stack edges are either ragged or well aligned, and there are gaps, of the order of 100 mm wide, around the stack edge. The predictions of the CFD program suggest that even with well-aligned edges, bypassing of 10-25% is likely for typical air velocities used in these kilns. For ragged-edge stacks, bypassing of approximately 100% is predicted, and has also been found by previous kiln audits. The additional cost of 100% bypassing is around S8,000 per kiln per year or about 3% of the total energy costs. The agreement between the CFD predictions and the kiln audits gives confidence in CFD for assessing the use of baffles to reduce bypassing.