SAE technical papers on CD-ROM/SAE technical paper series · 2010 · 32 citations · 7 references
EngineeringAutomotive EngineeringMechanical EngineeringCombustionInternal Combustion EnginesPowertrain EngineeringDiesel TechnologyEngine DesignEngine EfficiencyEngine PerformanceEngine Performance CharacteristicsEngine SystemsDiesel Engine CombustionDiesel Engine FundamentalsDiesel Engine OperationTurbochargingTurbocharging ModelingTurbocharging SystemsTurbocharging Thermodynamics
<div class="section abstract"><div class="htmlview paragraph">While fuel efficiency has to be improved, future Diesel engine emission standards will further restrict vehicle emissions, particularly of nitrogen oxides. Increased in-cylinder filling is recognized as a key factor in addressing this issue, which calls for advanced design of air and exhaust gas recirculation circuits and high cooling capabilities.</div> <div class="htmlview paragraph">As one possible solution, this paper presents a 2-stage boosting breathing architecture, specially dedicated to improving the trade-off between emissions and fuel consumption instead of seeking to improve specific power on a large family vehicle equipped with a 1.6-liter Diesel engine. In order to do it, turbocharger matching was specifically optimized to minimize engine-out NOx emissions at part-load and consumption under common driving conditions.</div> <div class="htmlview paragraph">Engine speed and load were analyzed on the European driving cycle. The key operating points and associated upper boundary for NOx emission were identified. Then, automated single-cylinder engine tests were performed using the design of experiment method in order to characterize engine responses and to identify the corresponding in-cylinder filling targets.</div> <div class="htmlview paragraph">Defining low full-load targets, turbo matching was undertaken to satisfy this performance requirements with the best charging capacity at part-load. Following a 0D air path simulation study based on manufacturer maps, two turbochargers were chosen.</div> <div class="htmlview paragraph">Afterwards, an engine model was developed using the IFP-Engine library in the LMS Imagine.Lab AMESim simulation tool. Phenomenological combustion modeling was used and an advanced breathing architecture fully reproduced.</div> <div class="htmlview paragraph">The physical modeling offered a means of checking that the in-cylinder filling targets could be achieved and of comparing the fuel consumption for different configurations. Lastly, transient simulations were performed to estimate the dynamic response of the engine in a vehicle situation.</div></div>
7
Sylvain Mendez, Benoist Thirouard · SAE international journal of fuels and lubricants · 2008 · 190 citations
Engineering, Automotive Engineering, Mechanical Engineering +16
Christian Barba, Christine Burkhardt, Konstantinos Boulouchos et al. · SAE technical papers on CD-ROM/SAE technical paper series · 2000 · 150 citations
Engineering, Automotive Engineering, Mechanical Engineering +17
Carlo Beatrice, Giovanni Avolio, N. Del Giacomo et al. · SAE technical papers on CD-ROM/SAE technical paper series · 2008 · 26 citations
Engineering, Automotive Engineering, Mechanical Engineering +15
V. Cursente, P. Pacaud, B. Gatellier · SAE international journal of fuels and lubricants · 2008 · 24 citations
Engineering, Automotive Engineering, Mechanical Engineering +17