EFFECTS OF TEXTURES AND THE AGGREGATES THAT PRODUCE THEM ON THE PERFORMANCE OF BITUMINOUS SURFACES

J J Henry, S H Dahir

Transportation Research Record Journal of the Transportation Research Board · 1979 · 12 citations · 0 references

Concepts

Abstract

Results of a Pennsylvania State University study of the characteristics of pavement surface textures and the aggregates that produce them are reported. The primary requirements of bituminous surfaces are durability and safety. Surface microtexture induces high levels of friction at low vehicle speeds, and surface macrotexture facilitates the drainage of water from the tire-pavement interface and reduces glare and splash and spray. Aggregate gradation largely determines the design of pavement surfaces. It is concluded that, to retain microtexture, the aggregate must contain a high proportion of hard mineral content embedded in a softer matrix or be composed predominantly of sharp, hard crystals well cemented in a porous configuration. To provide and retain adequate macrotexture, aggregate particles must be hard and tough and 3 to 19 mm (0.12 to 0.75 in.) in size. Angular, bulky particles perform better than rounded, flaky particles. Textures that improve skid resistance on wet surfaces were found to reduce glare and splash and spray, thereby increasing the safety of the surface. /Author/