A novel flexographic printed strain gauge on paper platform

Abstract

A novel flexible printed strain gauge was fabricated successfully on a flexible paper substrate using flexography printing process. Silver (Ag) ink was printed on the paper substrate as metallization layer. The performance of the printed device was investigated by subjecting the strain gauge to a 3-point bend test, with a displacement of 1 mm and 2 mm at 3 Hz operating frequency for 500 cycles. The electro-mechanical response of the strain gauge for the 1 mm displacement demonstrated an overall resistance change of 6.4 % and 6.5 % for the base resistance and bend resistance, respectively after 500 cycles of bending. Similarly an overall resistance change of 87.97 % and 28.8 % was observed for the base resistance and bend resistance, respectively after 500 cycles of bending for 2 mm displacement. The response of the fabricated strain gauge, as a function of electrical resistance, is analyzed and presented in this paper.