JOURNAL OF TROPICAL FOREST SCIENCE · 2015 · 20 citations · 23 references
Natural SciencesMaterials EngineeringMaterials ScienceBiomaterialsMechanical Behavior Of MaterialsRheologyMechanical TestingTensile PropertiesThermal Properties Of MaterialsWood MaterialsAdhesive StrengthBond StrengthHot PressingParenchyma CellsPressingPressing TemperatureSwellingSwelling Resistance
-3 compared with control samples. Both the modulus of rupture and modulus of elasticity of samples also increased with densification. The hot pressing increased hardness and brittleness of the samples but caused some loss of hardness when higher temperatures were used. The thermally-compressed samples had higher thickness swelling values than control samples due to spring back of cell wall when they were soaked in water. The combination of compression and heat resulted in specimens with smooth surfaces. The increased surface density reduced adhesive bond strength of samples. Contact angle measurement of samples using water decreased with increasing temperature due to cracks of cell walls of parenchyma cells after compression at high temperature. Thermally-compressed oil palm wood samples appeared to possess better mechanical properties but thickness swelling was adversely affected. The pressure, temperature and duration of hot pressing need to be optimised for specific applications.
23