Chinese Physics B · 2013 · 10 citations · 20 references
EngineeringElectrical EngineeringMechanical EngineeringDynamical SystemsElectric MachinesPower ElectronicsBrushless Dc MachinesElectric DrivesElectric MotorsEnergy StoragePermanent Magnet MachinesPower System StabilityBrushless Direct Current MachinesBrushless Direct Current Motor DrivesBrushless Direct Current MotorsElectromechanical CouplingFlywheel Energy StorageHopf BifurcationPermanent Magnet MotorsStability Regions
In this paper, the dynamic behavior analysis of the electromechanical coupling characteristics of a flywheel energy storage system (FESS) with a permanent magnet (PM) brushless direct-current (DC) motor (BLDCM) is studied. The Hopf bifurcation theory and nonlinear methods are used to investigate the generation process and mechanism of the coupled dynamic behavior for the average current controlled FESS in the charging mode. First, the universal nonlinear dynamic model of the FESS based on the BLDCM is derived. Then, for a 0.01 kWh/1.6 kW FESS platform in the Key Laboratory of the Smart Grid at Tianjin University, the phase trajectory of the FESS from a stable state towards chaos is presented using numerical and stroboscopic methods, and all dynamic behaviors of the system in this process are captured. The characteristics of the low-frequency oscillation and the mechanism of the Hopf bifurcation are investigated based on the Routh stability criterion and nonlinear dynamic theory. It is shown that the Hopf bifurcation is directly due to the loss of control over the inductor current, which is caused by the system control parameters exceeding certain ranges. This coupling nonlinear process of the FESS affects the stability of the motor running and the efficiency of energy transfer. In this paper, we investigate into the effects of control parameter change on the stability and the stability regions of these parameters based on the averaged-model approach. Furthermore, the effect of the quantization error in the digital control system is considered to modify the stability regions of the control parameters. Finally, these theoretical results are verified through platform experiments.
20
Artificial parameter homotopy methods for the DC operating point problem
Robert Melville, Ljiljana Trajković, Shu‐Cherng Fang et al. · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · 1993 · 181 citations
Engineering, Computational Engineering, Electrical Engineering +15
Three models for the homotopy theory of homotopy theories
Julia E. Bergner · Topology · 2007 · 144 citations