TURBULENCE MODELING TREATMENT FOR ROTORCRAFT WAKES

Mark Potsdam, Aeroflightdynamics Directorate, Thomas H. Pulliam

2008 · 18 citations · 24 references

Concepts

Abstract

This work investigates the influence of turbulence modeling in the vortical wake of rotorcraft simulat ions. It is seen that for a range of flight conditions, b ut especially hover, overall rotor performance pred iction can be significantly affected by the wake turbulence model characteristics. The characteristics of some basel ine turbulence model formulations (e.g. Baldwin-Barth, Spalart-Allmaras) are observed to produce too much turbulent eddy viscosity if the production is based on the vorticity field of the vortex-dominated rot or wake. Due to the excess production of the turbulent eddy visc osity in the wake, and its subsequent convection an d diffusion, the wall-bounded viscous flow is modified. To ameli orate these difficulties, turbulence model modifica tions in the wake, such as turning off the production source terms, are evaluated. They are shown to improve solution accuracy compared with experimental data for a quarter-scale V-22 isolated rotor in hover, a CH-47 iso lated rotor in hover, and a UH-60A in forward flight at h igh thrust coefficient. The overall effect on rotor performance can be several points in rotor figure of merit or a variation in stall boundary thrust coefficient.

References

24