International Journal of Research in Engineering and Technology · 2015 · 27 citations · 15 references
EngineeringCivil EngineeringMaterials EngineeringBuilding MaterialsConstruction MaterialsStructural MaterialsConcrete MaterialsWood MaterialsAsh ContentCompressive StrengthReplacementThermal Insulation PerformanceWater AbsorptionWater Absorption CapacityWater Absorption TestingWater Vapor Absorption
Utilization of wood ash as a partial substitution for cement is one of the promising method to increase the strength and thermal insulation for cement blocks. The present study focused to use wood ash as a partial replacement for cement material during sand cement block manufacturing. The concrete mixtures have been mixed with 10%, 15% 20% and 25% of wood ash as a partial replacement for cement with sand and tested for compressive strength, water absorption and heat release. Higher compressive strength was observed in the samples of 15% containing wood ash replacement material. All the samples other than 25% of wood ash replacement were shown lower water absorption and highest was found in 15% wood ash content. Slower heat release was observed in the samples of 15% and 20% of wood ash replacement after 21 days of curing time. Addition of 15% wood ash for the manufacturing of concrete blocks was developed and these blocks meet standard limits.
15
An overview of the composition and application of biomass ash.
Stanislav V. Vassilev, David Baxter, Lars K. Andersen et al. · Fuel · 2012 · 516 citations