Energy Procedia · 2015 · 13 citations · 4 references
EngineeringMechanical EngineeringAeroelasticityMechanical DesignWind EngineeringWind Energy SystemsWind Turbine TechnologyWind-tunnel TestingBlade AerodynamicsPower Coefficient AnalysisTip Speed EffectsTorqueTurbinesWind Turbine Aerodynamics
The present work was studied the effect of the tip speed ratio to the starting rotation, rev up rotation, power and torque coefficients of a two-shaft co-axis counter-rotating wind turbine (CR-WT). The prototype of CR-WT was tested in the open type wind tunnel with the velocities of 1.5, 2.0, 3.0, 4.0 and 5.0 m/s. CR-WT consisted of 8 blades. The blade is made of wood. It consists of 2 hubs 2 axis and 4 arms. The inner axis is clockwise rotation and outer axis is anticlockwise rotation. The inner and outer are in the identical axis. Both axes are driven the pulley by using the counter rotating gear. The analysis of the experimental results showed that the cut in wind speed of CR-WT was 1.744 m/s and it is increasing when the tangential force ratio increasing. Rev up rotation period depends on wind speed and tangential force ratio. The average of power coefficient of CR-WT was 14.89%.
4
L. C. W. B., Sverre Petterssen · Geographical Journal · 1942 · 164 citations
The variable geometry vertical axis windmill
P. J. Musgrove · 1977 · 21 citations