IEEE Transactions on Reliability · 2015 · 106 citations · 25 references
EngineeringIndustrial EngineeringSystems EngineeringCondition AssessmentCorrosion ScienceMaintenance EngineeringCondition-based MaintenanceCorrective MaintenanceMaintainability EngineeringMaintenance ManagementPreventive MaintenanceReliability ModelingCorrective ReplacementCrack GrowthDegradationDegradation ModelingExternal ShocksMixed ShockShock ModelsStochastic Deterioration Modeling
Internal degradation such as crack growth, erosion, or corrosion and random external shocks—fatal or non‑fatal—are modeled by stochastic deterioration and mixed shock processes that jointly determine system reliability. The study proposes a condition‑based maintenance policy with imperfect repair and seeks the optimal inspection interval that minimizes the long‑run maintenance cost rate. Under the policy, the system is inspected at fixed intervals and maintenance actions—no action, imperfect repair, preventive or corrective replacement—are chosen based on the observed health condition, with imperfect repair reducing degradation to a specified level. A micro‑electro‑mechanical system example demonstrates the efficiency of the proposed reliability and condition‑based maintenance models.
Based on reliability analysis for a system subject to s-dependent competing risks of internal degradation and external shocks, we propose a condition-based maintenance policy considering imperfect repair for complex systems. The internal degradation (e.g., crack growth, erosion, or corrosion) can be modeled using a stochastic deterioration process. External shocks arriving at random times are divided into two classes based on their impacts on the system: 1) fatal shocks that can cause the system to fail immediately, if a shock belongs to any of three classic shock models (i.e., extreme shock model, run shock model, and δ-shock model), or the generalized mixed shock model; and 2) non-fatal shocks that can damage the system by randomly increasing the degradation level. Using the proposed condition-based maintenance policy, the system is inspected at fixed time intervals, and a decision for an appropriate maintenance action (i.e., no action, imperfect repair, preventive or corrective replacement) is made based on the actual health condition of the system detected through inspection. The imperfect repair restores the system by lowering the degradation amount to a certain level. The objective is to determine the optimal inspection interval that minimizes the expected long-run maintenance cost rate. A micro-electro-mechanical system example is used to evaluate the efficiency of the developed reliability and condition-based maintenance models.
25