IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · 2012 · 32 citations · 14 references
EngineeringElectrical EngineeringMaterials ScienceElectronic MaterialsMicroelectronicsMicrowave EngineeringMicrowave FiltersResonant CircuitsAcoustic FiltersAcoustic Wave FiltersBandwidthBarium TitanateInsertion LossResonator Quality FactorReturn LossStrontium Barium Titanate
This paper reports on the modeling, fabrication, and experimental results of a voltage switchable barium strontium titanate solidly mounted resonator filter at 6 GHz. The filter insertion loss was measured to be -4.26 dB and the return loss to be -13.5 dB. The 3-dB bandwidth was measured to be 72 MHz and the quality factor was calculated to be 83. The data were collected at a dc bias voltage of 10 V. Temperature data were also collected, and the filter demonstrated a 0.71-dB increase in insertion loss and a 7-MHz decrease in center frequency with increase in temperature.
14
Thin film resonators and filters
K.M. Lakin · 2003 · 181 citations
Natural Sciences, Electrical Engineering, Materials Science +12
Solidly mounted resonators and filters
K.M. Lakin, K.T. McCarron, R.E. Rose · 2002 · 151 citations
Optimization of acoustic mirrors for solidly mounted BAW resonators
S. Marksteiner, J. Kaitila, Gernot Fattinger et al. · 2006 · 91 citations