2008 · 10 citations · 3 references
EngineeringElectrical EngineeringMechanical EngineeringAnalog ElectronicsMicroelectromechanical SystemsMicroelectronicsCmos Circuit DesignLow-noise Circuit DesignMems DesignMems ModelingNoise In Analog CircuitsSensor NoiseCapacitanceGyroscopesOffset CancellationReadout NoiseResonant Transient ResponseSignal ReadoutSwitched-capacitor Circuit DesignSwitched-capacitor Circuits
This paper presents a gain-programmable low-noise switched-capacitor circuit for readout of a bulk micromachined gyroscope with a resonance frequency of 3–4 kHz and signal bandwidth of 100 Hz. A charge transfer method is adopted which enables the common node of the sensing and driving structure in gyroscope to a stable biasing voltage, so that the driving force influence of the voltage fluctuation on the common node in the traditional readout method is eliminated. An offset cancellation scheme is used in the readout circuit to suppress the opamp’s offset and two programmable capacitor arrays are also implemented on-chip to compensate the initial capacitance offset from the MEMS gyroscope. In order to simulate the transient response of the circuit to the vibrating gyroscope, a simplified model is proposed which uses a time-varying voltage to generate a time-varying capacitor. The chip measures 2×2.5mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> in a standard 0.35μm CMOS process. Simulation results show that the readout circuit can resolve input capacitance variations of 95aF in 100Hz bandwidth with 83.4dB dynamic range from a single 5V supply.
3
Janusz Bryzek, Shad Roundy, Brian L. Bircumshaw et al. · IEEE Circuits and Devices Magazine · 2006 · 84 citations