Modelling and Simulation in Materials Science and Engineering · 2003 · 804 citations · 9 references
EngineeringManufacturing EngineeringMechanical EngineeringHeat TransferInterface ScienceThermal AnalysisContact AnalysisContact MechanicsFriction Stir WeldingMachiningSliding ContactWelding ProcessesAnalytical ModelsFriction Stir ProcessingFriction Stir Welding ProcessFriction WeldingHeat GenerationMaterial FlowNormal Contact ConditionsTool Surface Engineering
The objective of this work is to establish an analytical model for heat generation by friction stir welding (FSW), based on different assumptions of the contact condition between the rotating tool surface and the weld piece. The material flow and heat generation are characterized by the contact conditions at the interface, and are described as sliding, sticking or partial sliding/sticking. Different mechanisms of heat generation are behind each contact condition, making this study important for further understanding of the real FSW process. The analytical expression for the heat generation is a modification of previous analytical models known from the literature and accounts for both conical surfaces and different contact conditions. Experimental results on plunge force and torque are used to determine the contact condition. The sliding condition yields a proportional relationship between the plunge force and heat generation. This is not demonstrated in the experiment, which suggests that the sticking contact condition is present at the tool/matrix interface.
9
Effects of friction stir welding on microstructure of 7075 aluminum
C. G. Rhodes, M. W. Mahoney, William H. Bingel et al. · Scripta Materialia · 1997 · 881 citations
W. M. Thomas · Medical Entomology and Zoology · 1991 · 764 citations
Engineering, Manufacturing Engineering, Mechanical Engineering +7