Optics Express · 2015 · 32 citations · 16 references
EngineeringElectrical EngineeringMaterials ScienceOpticsOptoelectronicsPhotonicsIntegrated OpticsOptical Coherence TomographyOptical ModulatorsOptical ResonatorsOptical WaveguidesWaveguidesFabricationIntegrated WaveguidesPhase ModulatorsRidge WaveguidesSingle-mode FibersSingle-mode Optical FibersWaveguide FabricationWaveguide Loss
optical ridge waveguides and Single Mode Fibers. 3D-Pseudo-Spectral-Time-Domain calculations and Optical-Coherence-Tomography-based methods are advantageously used for the numerical and experimental study of the tapers. The tapered-section is done simultaneously with the ridge waveguide by means of a circular precision dicing saw, so that the fabrication procedure is achieved in only two steps. The total insertion losses through a 1.6 cm long ridge waveguide are measured to be improved by 3 dB in presence of the taper. These tapered-ridge waveguides open the way to the low-cost production of low-loss phase modulators or resonators.
16
Electro–optically tunable microring resonators in lithium niobate
Andrea Guarino, G. Poberaj, Daniele Rezzonico et al. · Nature Photonics · 2007 · 568 citations · Full text
Natural Sciences, Electrical Engineering, Materials Science +14
Heterogeneous lithium niobate photonics on silicon substrates
Payam Rabiei, Jichi Ma, Saeed Khan et al. · Optics Express · 2013 · 266 citations · Full text
Quasi-phase-matched adhered ridge waveguide in LiNbO3
Sunao Kurimura, Yuji Katō, Masayuki Maruyama et al. · Applied Physics Letters · 2006 · 116 citations
Natural Sciences, Electrical Engineering, Materials Science +16
Lithium niobate ridge waveguide modulator
I. P. Kaminow, V. Ramaswamy, R. V. Schmidt et al. · Applied Physics Letters · 1974 · 110 citations