Materials Science and Technology · 2014 · 18 citations · 35 references
EngineeringMaterials EngineeringMaterials ScienceMetallic MaterialsMetallurgyStructural MaterialsAlloysComposite MaterialsMetal MaterialsMetal Matrix CompositesReinforcement MaterialsSinteringAbrasive Wear ResistanceAluminum-containing AlloysMetal-ceramic CompositesSpark Plasma SinteringTechnical CeramicsTitanium AlloysTitanium MaterialsTitanium Matrix Composites
In this work, Ti/Al–Cr–Fe metal matrix composites were fabricated with Ti as matrix and Al–Cr–Fe quasicrystal approximants as reinforcements using spark plasma sintering. In all samples a Ti 3 Al ring forms around each Al–Cr–Fe particle as a bonding layer between Ti and Al–Cr–Fe particles. In the sample sintered with a holding time of 5 min, there are only TiAl regions present at the Ti 3 Al/Al–Cr–Fe interface. However, in the samples sintered with a holding time of 10, 15 or 20 min, TiAl, Ti(Al,Cr) 2 and L1 2 regions were detected at the Ti 3 Al/Al–Cr–Fe interface. The addition of Al–Cr–Fe particles into the Ti matrix was found to improve the mircrohardness to 460 HV and increase the wear resistance by more than 50.
35
Metallic Phase with Long-Range Orientational Order and No Translational Symmetry
D. Shechtman, I. A. Blech, D. Gratias et al. · Physical Review Letters · 1984 · 7K citations · Full text