A 1.0–4.0-Gb/s All-Digital CDR With 1.0-ps Period Resolution DCO and Adaptive Proportional Gain Control

Abstract

This paper describes the design and implementation of an all-digital clock and data recovery circuit (ADCDR) for multigigabit/s operation. The proposed digitally-controlled oscillator (DCO) incorporating a supply-controlled ring oscillator with a digitally-controlled resistor (DCR) generates wide-frequency-range multiphase clocks with fine resolution. With an adaptive proportional gain controller (APGC) which continuously adjusts a proportional gain, the proposed ADCDR recovers data with a low-jitter clock and tracks large input jitter rapidly, resulting in enhanced jitter performance. A digital frequency-acquisition loop with a proportional control greatly reduces acquisition time. Fabricated in a 0.13-μm CMOS process with a 1.2-V supply, the ADCDR occupies 0.074 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> and operates from 1.0 Gb/s to 4.0 Gb/s with a bit error rate of less than 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-14</sup> . At a 3.0-Gb/s 2 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">31</sup> - 1 PRBS, the measured jitter in the recovered clock is 3.59 ps <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">rms</sub> and 29.4 ps <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">pp</sub> , and the power consumption is 11.4 mW.