IEEE Transactions on Biomedical Engineering · 2005 · 138 citations · 13 references
EngineeringMechatronics EngineeringRobotics EngineeringMovement AnalysisRobot KinematicsRoboticsBiomechanical InstrumentationGait AnalysisHuman LocomotionKinematic AnalysisMotion CaptureMovement KinematicsAccelerometersAccuracyKinematic MeasurementKinematic SensingLocomotionTest Bench DesignTest Bench DevelopmentTest Bench Validation
The authors propose a wearable device that reconstructs the 3‑D position and orientation of a human body segment during locomotion tasks. The device comprises three mono‑axial accelerometers and three angular‑velocity sensors arranged orthogonally, and was bench‑tested with motor‑based equipment and validated against a stereophotogrammetric motion analyzer during stand‑to‑sit, sit‑to‑stand, and gait‑initiation trials. Bench‑test results showed negligible crosstalk, <0.1 % full‑scale nonlinearity and hysteresis, 0.3 % full‑scale accuracy, and sub‑0.04 deg s⁻¹ resolution, while validation yielded trajectory errors below 0.03 m and 2 deg over 4 s and below 0.006 m and 0.2 deg during task execution, confirming the device’s suitability for short‑duration clinical applications.
In this paper, we propose a device for the Position and Orientation (P&O) reconstruction of human segmental locomotion tasks. It is based on three mono-axial accelerometers and three angular velocity sensors, geometrically arranged to form two orthogonal terns. The device was bench tested using step-by-step motor-based equipment. The characteristics of the six channels under bench test conditions were: crosstalk absent, non linearity </spl plusmn/0, 1% fs, hysteresis <0, 1% fs, accuracy 0, 3% fs, overall resolution better than 0, 04 deg/s, 2*g*10/sup -4/. The device was validated with the stereophotogrammetric body motion analyzer during the execution of three different locomotion tasks: stand-to-sit, sit-to-stand, gait-initiation. Results obtained comparing the trajectories of the two methods showed that the errors were lower than 3*10/sup -2/ m and 2 deg during a 4s of acquisition and lower than 6*10/sup -3/ m and 0.2 deg during the effective duration of a locomotory task; showing that the wearable device hereby presented permits the 3-D reconstruction of the movement of the body segment to which it is affixed for time-limited clinical applications.
13