Electronics Letters · 2012 · 12 citations · 7 references
EngineeringElectrical EngineeringMaterials ScienceElectronic MaterialsMicroelectronicsSemiconductor DevicesCmos Circuit DesignComplementary Metal-oxide-semiconductor TechnologyMemory DevicesMemristive MaterialsMetal-oxide-semiconductor Field-effect TransistorsOxide SemiconductorsAnalog Switching BehaviorEtching MasksFabricationMemristive MemoryNeuromorphic DevicesNeuromorphic HardwareNon-volatile MemoryOxide Memristive Materials
In the past, tantalum oxide devices have been used to create non-volatile digital memories, whilst neglecting the analogue memristive characteristics of such devices. In this Letter, it is shown that these devices can provide a low-cost, low-power solution for hemi-memristive devices, when used in their pre-formed, memristive region, whilst being fully CMOS compatible. Furthermore, measurements are presented from the devices that have been fabricated and it is shown that these devices do not require electroforming. Electroforming circuitry takes up valuable chip space at the transistor layers and significantly increases fabrication cost, since voltages as high as 12 V are required, which in turn requires extra masks to form high voltage devices and distribution circuits.
7
Dmitri B. Strukov, Gregory S. Snider, Duncan R. Stewart et al. · Nature · 2008 · 11.5K citations
Engineering, Electrical Engineering, Electronic Materials +5
Memristor-The missing circuit element
Leon O. Chua · IEEE Transactions on Circuit Theory · 1971 · 10K citations
Nanoscale Memristor Device as Synapse in Neuromorphic Systems
Sung Hyun Jo, Ting‐Chang Chang, Idongesit E. Ebong et al. · Nano Letters · 2010 · 4.1K citations
Life Sciences, Electrical Engineering, Materials Science +17