Optics Express · 2009 · 143 citations · 22 references
Natural SciencesMaterials EngineeringMaterials ScienceOpticsPhotonicsThin FilmsIntegrated PhotonicsOptical Thin FilmsOptical WaveguidesPhotonic Device SimulationPhotonic MaterialsThin Film Optical PropertiesDevice FabricationLithium NiobateLithium Niobate PhotonicsMillingMilling ProcessesOptical Waveguide SimulationWaveguide DesignWaveguide Fabrication
LN photonic wires of cross-section dimensions down to 1 x 0.73 microm2 were fabricated by Ar milling of a single-crystalline LiNbO3 (LN) film bonded to a SiO2/LiNbO3 substrate. Mode intensity distributions, propagation losses, and group indices of refraction were measured at 1.55 microm wavelength and compared with simulation results. Moreover, effective mode indices and end face reflectivities were numerically evaluated. The waveguide of 1 microm top width is the smallest LN photonic wire reported to date; it has a mode size of approximately 0.4 microm2 (0.5 microm2) only and propagation losses of 9.9 dB/cm (12.9 dB/cm) for qTM (qTE) polarization.
22
David E. Zelmon, David L. Small, D. H. Jundt · Journal of the Optical Society of America B · 1997 · 844 citations
Natural Sciences, Materials Engineering, Materials Science +17
Electro–optically tunable microring resonators in lithium niobate
Andrea Guarino, G. Poberaj, Daniele Rezzonico et al. · Nature Photonics · 2007 · 568 citations · Full text
Natural Sciences, Electrical Engineering, Materials Science +14
Loss in low-finesse Ti:LiNbO3 optical waveguide resonators
Rolf A. Regener, W. Sohler · Applied Physics B · 1985 · 362 citations